Training on Tanker Cargo Operations
Maritime & Shipping · 10 Days
Course Overview
Safe tanker cargo operations require coordinated control of cargo properties, vessel systems, structural limitations, terminal interfaces and environmental risks. This programme equips maritime professionals with a systematic approach to managing oil and chemical cargo operations from pre-arrival preparation through loading, carriage, discharge and post-cargo activities.
Participants examine cargo piping and pumping arrangements, tank atmospheres, cargo measurement, stability and longitudinal strength, transfer controls, tank cleaning and operational records. The course connects these technical subjects to applicable SOLAS, MARPOL and STCW requirements, the IBC Code where relevant, and recognised tanker and terminal safety guidance. Particular attention is given to vessel-specific procedures, cargo compatibility, occupational exposure, emergency shutdown arrangements and the responsibilities shared between ship and terminal.
Worked calculations, cargo-plan reviews, document exercises and facilitated emergency scenarios place learning in the context of African ports, terminals and international trading routes. An integrated case exercise requires participants to prepare and defend a cargo operation plan, identify operational limits and respond to changing conditions. The programme focuses on oil and chemical tankers; specialised liquefied gas cargo operations require separate training.
Course Curriculum
1
Tanker Operations Framework and Responsibilities
- Oil and chemical tanker types, trading patterns and operational boundaries
- Responsibilities of the master, chief officer, cargo watch and shore management
- SOLAS, MARPOL Annexes I and II, and STCW tanker training requirements
- Application of the IBC Code and vessel certification to chemical cargo carriage
- Use of ISGOTT, safety management systems and terminal operating requirements
- Operational assurance through risk assessment, permits, briefings and stop-work authority
2
Cargo Properties, Hazards and Compatibility
- Density, viscosity, vapour pressure and temperature effects on cargo behaviour
- Flash point, flammability limits and sources of ignition
- Toxicity, exposure routes and interpretation of safety data sheets
- Chemical reactivity, incompatible substances and segregation requirements
- Cargo quality specifications, contamination pathways and coating compatibility
- Static electricity, electrostatic accumulation and cargo-handling precautions
3
Cargo Systems and Protective Equipment
- Reading cargo piping diagrams and identifying transfer flow paths
- Cargo pumps, stripping systems, eductors and performance limitations
- Manifolds, valves, crossovers, non-return arrangements and isolation controls
- Tank venting, vapour return and pressure-vacuum protection arrangements
- Inert gas systems, tank-atmosphere monitoring and operating limitations
- Gauging, alarm, shutdown and gas-detection equipment checks
4
Cargo Measurement and Quantity Calculations
- Ullage, sounding, reference heights and tank calibration tables
- Temperature measurement, representative sampling and closed-system precautions
- Free-water determination and identification of non-cargo quantities
- Trim and list corrections using approved vessel information
- Volume correction, density relationships and mass calculations using supplied data
- Quantity reconciliation, vessel experience factors and investigation of discrepancies
5
Cargo Planning, Stability and Structural Limits
- Reviewing voyage orders, cargo nominations and vessel suitability
- Developing tank allocations, segregation plans and cargo sequences
- Accounting for thermal expansion, filling limits and cargo temperature requirements
- Assessing intact stability, free-surface effects, trim and draught restrictions
- Checking shear forces, bending moments and loading conditions with approved tools
- Coordinating cargo and ballast sequences within vessel operating limits
6
Pre-Arrival Preparation and Ship–Shore Coordination
- Exchanging pre-arrival cargo, vessel and terminal information
- Reviewing berth restrictions, mooring arrangements and environmental limits
- Conducting the ship–shore safety meeting and completing applicable checklists
- Agreeing transfer rates, pressure limits, communications and emergency signals
- Verifying hose or loading-arm suitability, connections and manifold arrangements
- Confirming tank readiness, line configuration and authorisation to commence transfer
7
Loading Operations and Watchkeeping
- Controlled commencement of loading and verification of intended cargo routing
- Initial-rate precautions and checks for leakage, contamination and static hazards
- Monitoring tank levels, transfer pressures, venting and inert gas conditions
- Managing simultaneous cargo loading and ballast discharge activities
- Topping-off sequences, rate reductions and overfill-prevention controls
- Completing loading, clearing lines safely and securing cargo systems
8
Cargo Care During the Voyage
- Establishing cargo watch routines, inspection schedules and reporting thresholds
- Monitoring cargo temperatures, tank pressures and atmosphere conditions
- Controlling heating systems within cargo and vessel-specific limitations
- Maintaining segregation and preventing cross-contamination during carriage
- Managing cargo-related defects, abnormal trends and changes to voyage conditions
- Preparing arrival quantities, discharge information and operational handovers
9
Discharge, Stripping and Cargo Completion
- Developing discharge sequences and confirming terminal receiving arrangements
- Starting cargo pumps and managing suction, cavitation and pressure constraints
- Coordinating tank atmospheres, venting and vapour-return arrangements
- Controlling discharge rates and ballast intake throughout the operation
- Planning stripping, line draining and remaining-on-board assessment
- Reconciling outturn quantities and completing cargo transfer documentation
10
Tank Cleaning, Atmosphere Control and Entry Readiness
- Selecting cleaning methods for previous cargoes and subsequent cargo requirements
- Assessing cleaning-agent suitability, tank coatings and cargo-residue hazards
- Crude oil washing principles, approved arrangements and operational restrictions
- Controlling atmospheres during cleaning, purging and gas-freeing
- Verifying cleanliness through inspection, sampling and specified acceptance criteria
- Enclosed-space entry planning, atmosphere testing, isolation and rescue readiness
11
Pollution Prevention, Residues and Ballast Management
- Preventing deck spills through containment, drainage and equipment controls
- Applying MARPOL Annex I requirements to oily cargo residues and slops
- Applying MARPOL Annex II cargo categorisation, stripping and prewash requirements
- Planning reception-facility use and documenting waste transfers
- Coordinating ballast operations with approved ballast water management arrangements
- Maintaining applicable Oil Record Books, Cargo Record Books and supporting evidence
12
Abnormal Operations and Emergency Response
- Recognising transfer abnormalities and applying agreed shutdown criteria
- Responding to manifold leaks, hose failures and loading-arm incidents
- Managing loss of inert gas, venting restrictions and abnormal tank pressures
- Coordinating responses to high-level alarms, overfill and unintended cargo transfer
- Addressing fire, toxic exposure and personnel casualties through emergency plans
- Managing communications, notifications, incident evidence and initial recovery decisions
13
Integrated Cargo Operations Planning and Assessment
- Reviewing a tanker voyage case with cargo data, vessel limits and terminal conditions
- Preparing a cargo allocation plan, transfer sequence and ballast programme
- Calculating cargo quantities and checking stability and structural constraints
- Developing ship–shore agreements, risk controls and contingency arrangements
- Responding to scenario changes involving equipment faults and cargo discrepancies
- Presenting the operational plan and completing an individual competency assessment