Training on Ship Stability
Maritime & Shipping · 10 Days
Course Overview
Many of the most serious casualties at sea trace back to a misunderstanding of stability: a cargo shifted, a tank left slack, or a loading plan that looked fine on paper. Anyone involved in loading or operating a ship needs to understand why a vessel floats upright and what can change that.
This course develops stability knowledge from first principles to practical application. Participants work through buoyancy, centre of gravity, metacentric height, free surface effect, trim, hull stress and damaged stability, then apply these concepts using stability booklets and loading computers.
Ten days allows thorough practice. Participants solve worked problems, build loading plans for different cargo types and review real casualties, leaving able to make and check stability decisions with confidence.
Course Curriculum
1
Principles of Flotation
- Archimedes’ principle and buoyancy
- Displacement, deadweight and tonnage
- Density, fresh water allowance and load lines
- Tonnes per centimetre immersion
- Hydrostatic tables and curves
- Worked problems on draft and displacement
2
Centre of Gravity and Centre of Buoyancy
- Finding the ship’s centre of gravity
- Effect of adding, removing and shifting weight
- Vertical and longitudinal moments
- Centre of buoyancy behaviour
- Lightship data and inclining experiments
- Worked KG calculations
3
Initial Stability and Metacentric Height
- Transverse metacentre explained
- Calculating GM
- Stable, neutral and unstable equilibrium
- Stiff and tender ships
- Angle of list and how to correct it
- Angle of loll
4
Stability at Large Angles
- Righting lever and righting moment
- Constructing GZ curves
- Dynamic stability
- Range of stability and angle of vanishing stability
- Wind heeling and weather criterion
- IMO intact stability criteria
5
Free Surface Effect
- Why slack tanks reduce stability
- Free surface moments and corrections
- Tank subdivision
- Ballast exchange at sea
- Liquid cargo sloshing
- Practical slack tank management
6
Trim and Longitudinal Stability
- Longitudinal centre of flotation
- Moment to change trim
- Calculating drafts after loading
- Trim optimisation for fuel efficiency
- Bow and stern draft restrictions
- Worked trim problems
7
Hull Stress and Structural Limits
- Shear force and bending moment
- Hogging and sagging
- Permissible limits and loading manuals
- Sequential loading and discharge
- Bulk carrier structural failures
- Reading a loading computer stress output
8
Damaged Stability
- Flooding, permeability and bilging
- Lost buoyancy and added weight methods
- Damage stability requirements
- Watertight integrity and subdivision
- Emergency response to flooding
- Case studies of flooding casualties
9
Stability Documents and Loading Computers
- Reading the stability booklet
- Trim and stability calculations in practice
- Approved loading software
- Verifying computer output by hand
- Common input errors
- Port state control expectations
10
Grain and Bulk Cargo Stability
- Grain shifting moments
- International Grain Code
- IMSBC Code and liquefaction
- Stowage factor and trimming
- Calculating grain stability
- Liquefaction casualties
11
Deck Cargo, Containers and Heavy Lifts
- Container stack weights and GM
- Timber deck cargo
- Lashing forces and stability
- Heavy-lift operations and crane effects
- Roll period and parametric rolling
- Worked heavy-lift problem
12
Tankers, Ro-Ro and Offshore Stability
- Tanker loading and ballast management
- Ro-ro vessels and the risk of water on deck
- Passenger ship requirements
- Offshore supply vessels
- Dry-docking and stability
- Grounding and refloating
13
Casualty Analysis and Practical Planning
- Reviewing landmark stability casualties
- Human factors in stability decisions
- Building a full loading plan
- Checking it against criteria
- Stability in the safety management system
- Final practical assessment